Pentax Optio 33L - Page 65

65
Taking Pictures
4
You can set the bracket step to use when selecting Ex. Bracketing in
Auto Bracket Mode. Select from ±03, ±0.7, ±1.0, ±1.3, ±1.7, or ±2.0
1 Select [Ex. Bracket Step] on the
[
A Rec. Mode] menu.
2 Press the four-way controller (45) to
set the step.
3 Press the OK button.
The camera is ready to take a picture.
Three images will be taken; one with standard exposure, one with a
positive (+) step, and one with a negative (-) step.
You can set the bracket step to use when selecting White Balance in
Auto Bracket Mode. Select from ±1, ±2, ±3, ±4, or ±5.
1 Select [WB Bracket Step] on the
[
A Rec. Mode] menu.
2 Press the four-way controller (45) to
set the step.
3 Press the OK button.
The camera is ready to take a picture.
Three images will be taken; one with standard white balance, one
with a positive (+) step, and one with a negative (-) step.
Setting the Exposure Bracket
Setting the White Balance Bracket
MENU OK
Digital Zoom
Instant Review
3D Mode
Parallel
Exit Ok
Rec.Mode
0.5s
0.3
1
Soft Setting
Ex. Bracket Step
WB Bracket Step
MENU OK
Digital Zoom
Instant Review
3D Mode
Parallel
Exit Ok
Rec.Mode
0.5s
0.3
1
Soft Setting
Ex. Bracket Step
WB Bracket Step