EN-15
PREPARING THE CAMERA
Installing the Batteries (Optional Accessory)
You can use 2 AA size batteries (alkaline or Ni-MH rechargeable) to power the camera. Make sure that
the power of the digital camera is off before inserting or removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct orientation as shown in the
illustration.
4. Close the battery cover.
To remove the batteries,turn the camera off before removing
batteries and hold the camera with the battery cover facing
upward, then open the battery cover.
Be careful not to drop the batteries when opening or closing the battery cover.
2
1
2
3
To Next Page
Loading...
