Pentax Optio 50 - Step 2: Connect the Digital Camera to Your Computer

EN-55
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing
the button.
2. Press X to select the [Set-up2] menu, then use T to select [USB
Con.].
3. Press the button.
4. Use T to select [PC], then press the button.
5. Connect one end of the USB cable to an available USB port on
your computer.
6. There will be a new “Removable Disk” icon detected in “My
Computer”, which contains your recorded images or movie clips.
(For Mac users, double-click [untitled] or [unlabeled] disk drive
icon on our desktop.)
USB Con.
Set-up1
Set-up2
PC
OK :
5 / 5
PictBridge
USB Con.
PC
OK :
1 / 3
PC Camera
PC/AV terminal