EN-35
Auto Bracket
In this mode, the camera automatically changes the exposure within a set range to take three shots after
you press the shutter button once. Auto Bracket settings can be combined with exposure compensation
settings to extend the adjustment range.
1. Rotate the mode dial to , , , , or and turn your
camera on by pressing the button.
2. Press the MENU button, then use X to select the [Mode2] menu.
In the mode, press the MENU button.
3. Use T to select [Drive Mode], then press the button.
4. Use S or T to select [Auto Bracket], then press the button.
5. To exit the menu, press the MENU button.
The indicator is displayed on the monitor screen.
6. Press the shutter button to capture the image.
OK : Exit :
Std.
HS Continuous
Auto Bracket
Drive Mode
3/3
In Auto Bracket mode, the flash mode will be set to OFF automatically.
To Next Page
Loading...
