Pentax OPTIO M10 User Manual

117
6
Editing and Printing Images
When you choose the number of copies and whether or not to insert the
date, the settings are applied to all the images stored in the camera.
1 Display the screen for DPOF settings in Q mode.
Refer to Steps 1 to 3 on p.115.
2 Use the four-way controller (23) to select [All Images].
3 Press the 4 button.
The message [DPOF setting for all images]
appears.
4 Choose the number of copies and
whether to insert the date or not.
Refer to Steps 6 and 7 in “Printing Single
Images” (p.116) for details of how to make
the settings.
5 Press the 4 button.
The DPOF settings for all the images are saved and the camera
returns to the DPOF setting screen.
Printing All Images
The number of copies specified in the DPOF settings applies to all
the images. Before printing, check that the number is correct.
Settings for single images are canceled when settings are made for
all images.
MENU OK
Guide
Guide
OK
OK
Guide OK
Slideshow
Slideshow
Slideshow
1, 2, 4
1, 3, 5
4
Copies
DPOF setting for
DPOF setting for
all images
all images
DPOF setting for
all images
Date
Date
Date
Cancel
Cancel
Cancel
OK
OK
OK
OK
MENU
01

Pentax OPTIO M10 Specifications

General

Megapixel	6 MP
Camera type	Compact camera
Sensor type	CCD
Image sensor size	1/2.5 \
Digital zoom	4 x
Optical zoom	3 x
Color depth	12 bit
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	89 x 24.5 x 59.5 mm
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	115000 pixels
Number of batteries supported	2
Product color	Silver
Compatible memory cards	sd

Weight and Dimensions

Depth	24.5 mm
Width	89 mm
Height	59.5 mm
Weight	165 g