Pentax OPTIO M10 User Manual

20
1
Getting Started
Powering the Camera
Install the batteries into the camera. Use two AA alkaline, AA lithium, AA
Ni-MH, or AA nickel manganese batteries.
1 Open the battery/card cover.
Pull the battery/card cover in the direction of 1 and flip the cover open
in the direction of 2.
2 Insert the batteries, making sure the (+) and (–) on the
batteries match the (+) and (–) inside the battery
compartment.
3 Close the battery/card cover and slide it back into
place.
Installing the Batteries
1
2

Pentax OPTIO M10 Specifications

General

Megapixel	6 MP
Camera type	Compact camera
Sensor type	CCD
Image sensor size	1/2.5 \
Digital zoom	4 x
Optical zoom	3 x
Color depth	12 bit
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	89 x 24.5 x 59.5 mm
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	115000 pixels
Number of batteries supported	2
Product color	Silver
Compatible memory cards	sd

Weight and Dimensions

Depth	24.5 mm
Width	89 mm
Height	59.5 mm
Weight	165 g