123
3
Taking Pictures
The camera automatically emits the Focus assist light in dark shooting
situations. You can set the light to on or off.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AF Setting].
3
Press the four-way controller (5 ).
The [AF Setting] screen appears.
4
Use the four-way controller
(23) to select [Focus
Assist].
5
Use the four-way controller (
45
) to select [
O
(On)/
P
(Off)].
The setting is saved.
6
Press the 3 button twice.
The camera returns to capture mode.
Setting the = Assist Light (Focus Assist)
Looking at the light directly will not create a safety hazard. However, do
not look into the emitter from a very short distance since you may feel
dazzled.
The camera does not emit the Focus Assist light under the following
conditions.
•In C (Movie), (Underwater Movie) or S (Fireworks) mode
• When the focus mode is set to 3 (Pan Focus), s (Infinity) or z
(Manual Focus).
MENU
AF Setting
Focusing Area
Auto Macro
Focus Assist
To Next Page
Loading...
Need help?
General
