96
3
Taking Pictures
If you have registered two or three pets, choose the pet you want to
detect.
1
Press the I button on the
capture status screen in
e (Pet) mode.
The pet registration screen appears.
2
Use the four-way controller (45) to select the pet you
want to detect.
3
Press the 4 button.
The selected pet is switched to the pet you want to detect and the
camera returns to capture status.
1
Press the I button on the
capture status screen in
e (Pet) mode.
The pet registration screen appears.
2
Use the four-way controller (45) to select the pet you
want to delete.
3
Press the Green button.
4
Use the four-way controller (2) to select [Delete].
5
Press the 4 button.
The selected pet is deleted.
To Switch the Pet You Want to Shoot
To Delete the Pet from the Entry
• [Focusing Area] is set to W (Automatic Tracking AF) and the flash
mode is set to a (Flash Off). However, you can change these settings.
• [Focus Assist] is set to off. However, you can change this setting.
OK
OK
Delete
MENU
Cancel
Selecting pet to shoot
OK
OK
Delete
MENU
Cancel
Selecting pet to shoot
To Next Page
Loading...
Need help?
General
