Pentax Optio S5i - Using the Self-Timer

62
Taking Pictures
4
In self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
1 Press the four-way controller (2) in Capture mode to
display g or r on the LCD monitor.
2 Press the shutter release button.
g The self-timer is engaged and the self-
timer lamp lights for about seven
seconds. The picture is taken
approximately three seconds after the
self-timer lamp starts to blink.
r The self-timer is engaged and the picture
is taken approximately two seconds after the self-timer lamp starts
to blink.
Using the Self-Timer
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking.
• The second count appears if you turn the LCD monitor on.
• To cancel the self-timer, press the MENU button while the second
count is displayed.
• In 3D Image mode, both the first and second images will be taken
with the self-timer engaged.
Taking Pictures of Yourself 1p.44
Troubleshooting “Subject is not in focus”
1p.137
2
1
112
112
112
12:00
12:00
12:00
7/18/2004
7/18/2004
7/18/2004