Pentax Optio S5i - Setting the Sensitivity

83
Taking Pictures
4
You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
1 Press the MENU button in Capture mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23)
to select [Sensitivity].
3 Use the four-way controller (45)
to change the sensitivity.
4 Press the OK button.
The camera is ready to take the picture.
Setting the Sensitivity
Auto
The camera sets the sensitivity automatically.
80
• The lower the sensitivity, the sharper the image and the less noise. The
shutter speed will be slower in low light conditions.
• The higher the sensitivity, the faster the shutter speed in low light
conditions to reduce camera shake, but the image may be affected by
noise.
100
200
400
Saving the Sensitivity 1p.89
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Multiple
Auto
AWB
2560x1920
MENU
OK
OK
Exit
1
2, 3
4
MENU
AWB
2560x1920
MENU
OK
OK
Exit
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Multiple
Auto