63
Taking Pictures
4
You can switch the Drive mode to Remote Control mode and take
pictures using the remote control unit E or F (optional).
1 Press the four-way controller (2)
in Capture mode to display
i or h
on the LCD monitor.
The self-timer lamp blinks slowly and the
camera is ready to take the picture.
2 Press the shutter release button
on the remote control unit.
i The self-timer lamp blinks quickly and the picture is taken after
approximately three seconds.
h The picture is taken immediately.
Using the Remote Control Unit (optional)
Taking Pictures Using the Remote Control
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking.
1
112
To Next Page
Loading...
