Pentax Optio WG-1 - Turning the Camera on

12
zPress the Power Switch
The camera turns on and is ready to take still
pictures. Press the power switch again to turn
the camera off.
zMake the Initial Settings
The [Language/ ] screen appears when the camera is turned on
for the first time. Select the desired language and then set the date
and time.
Use the four-way controller
(2345) to select the desired
language.
Press the 4 button.
The [Initial Setting] screen
appears.
If you accidentally select the wrong
language and press the 4 button,
press the four-way controller (5),
use the four-way controller (2345)
to select the desired language,
and then press the 4 button.
The [Initial Setting] screen appears
in the selected language.
MENU OK
Cancel OK
1
2
2
Memo
MENU
Cancel
Initial Setting
Hometown
New York
Settings complete
English
DST
OFF
OFF
OFF
Turning the Camera On
2
2
OptioWG-1_QSG_ENG.book Page 12 Friday, March 11, 2011 8:59 AM