Pentax P5 - Warning Displays in Viewfinder

WARNING DISPLAYS IN VIEWFINDER
Shutter speed ] __ Remarks
This display indicates the brightness of the subject is beyond the metering range
in the Programmed AE mode. Releasing the shutter will result in incorrect
exposure.
Indicates the brightness of the subject is beyond the metering range, or that the
combination of shutter speed and aperture is beyond the coupling range both
in Metered Manual mode. In the latter case, you can change the aperture to
obtain correct exposure. In the former case, the flickering does not disappear
even if you change the aperture. Releasing the shutter with this display
appearing will result in incorrect exposure.
Indicates the brightness of the subject is beyond the correct-exposure range in
the Metered Manual mode. Change the shutter speed and aperture, and when
the flickering disappears and only one speed remains lit, you are ready to shoot.
Indicates the brightness of the subject is beyond the metering range in the
Metered Manual mode. The flickering does not disappear even if you change
the shutter speed and aperture. Releasing the shutter will result in incorrect
exposure.
When the exposure-memory loc k is used, these LEDs flicker at a fast speed.
When batteries become exhausted, these LEDs flicker at a slow speed of once
per second.
38