EasyManua.ls Logo

Pentax PLP-701 - User Manual

Pentax PLP-701
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Ahead of Vision
PENTAX Industrial Instruments Co.,Ltd.
2-5-2 Higashi-Oizumi
Nerima-Ku, Tokyo 178-8555, Japan
Tel. +81 3 5905 1222
Fax +81 3 5905 1225
E-mail: international@piic.pentax.co.jp
Website:www.pentax.co.jp/piic/survey
www.pentaxsurveying.com
LASER LEVEL
PLP-700
INSTRUCTION
MANUAL
PLP-701
Automatic Self-leveling Laser
PLP-702
Automatic Self-leveling Laser
PLP-701R
Automatic Self-leveling Laser
PLP-702R
Automatic Self-leveling Laser
SERIES

Table of Contents

Questions and Answers

  • C
    Charles HendricksAug 12, 2025
    Why does lamp 1 turn on in my Pentax Laser Level?
    • A
      aperkinsAug 12, 2025
      If Lamp 1 turns on, it could be due to several reasons: 1. The Pentax Laser Level might be tilted beyond its auto-leveling range (± 5.7°). To resolve this, turn off the power, reset the instrument to within the level range, and then turn it back on. 2. The instrument might be significantly tilted due to some external factor. Try turning the power off and then on again. 3. The auto self-leveling function may be in an unstable state for about 3 minutes after being powered on. In this case, turn the power off and then on again.
  • G
    Gregory NolanAug 22, 2025
    How to fix a Pentax PLP-701 that does not rotate?
    • T
      tmitchellAug 22, 2025
      If your Pentax Laser Level does not rotate, there are a couple of potential causes: * The battery capacity might be low. Try replacing the batteries with fresh ones or charge the battery. * The batteries might be inserted incorrectly. Double-check the polarity of the batteries to ensure they are properly aligned.
  • K
    Kaylee KennedySep 1, 2025
    What to do if lamp 1 & lamp 2 blink mutually on Pentax PLP-701?
    • C
      Cynthia WalkerSep 1, 2025
      If Lamp 1 and Lamp 2 are blinking mutually on your Pentax Laser Level, it indicates a defect within the instrument itself. Try turning the power off and then on again. If the lamps continue to blink, the instrument requires repair.

Pentax PLP-701 Specifications

General IconGeneral
Laser ClassClass 2
Laser Wavelength635nm
Power Supply4 x AA batteries
Storage Temperature-20°C to +60°C
Protection ClassIP54
Working RangeUp to 30m (with detector)
Leveling Time<3s
Battery Life20 hours

Related product manuals