Select Enable to turn on your access point’s built-in web portal functionality.
Choose Open Access to allow users to connect without authentication or RADIUS to
require authentication. If RADIUS is selected, you’ll be given the opportunity to select a
RADIUS security method in the next field.
Select PAP, EAP-TTLS PAP, EAP-TTLS MSCHAPv2, or PEAPv0 EAP-MSCHAPv2.
If your web portal will use a splash page, choose HTTP or HTTPS and enter the splash
page’s URL.
If your web portal will use a landing page, check this box.
If you have checked Landing Page, enter your landing page’s URL here.
Check this box to allow users to have more than one logged in session active at a time.
Enter a value in minutes to limit access time on a given login or enter 0 to allow
unlimited use time on a single login.
Enter a value in minutes to logout following the specified period of inactivity or enter 0 to
disable inactivity logouts.
This menu determines how your usage quota resets. Setting it to Daily will reset it at a
specified time every day. Setting a number of minutes after quota reached establishes
a timer for each user that begins after the quota has been reached.
To whitelist a domain or IP address, enter the domain name / IP address here and click
. To delete an existing entry, click the button next to it.
To Next Page
Loading...
