Pepwave AP One User Manual

User Manual
http://www.pepwave.com
49
Copyright © 2015 Pepwave
10 Restoring Factory Defaults
The following procedure restores the settings of your access point to factory defaults:
 Power on the unit and wait for one minute.
 Press and hold the reset button for at least five seconds, then release.
 The unit will automatically reboot.
 Wait for one minute or until the status LED turns green, upon which the settings
of the device will have been restored to the factory defaults.
By default, the unit will acquire an IP address from a DHCP server.
10.1 AP One AC mini

Pepwave AP One Specifications

General

Brand	Pepwave
Model	AP One
Category	Wireless Access Point
Language	English