Pepwave AP One - Snmp

User Manual
http://www.pepwave.com
18
Copyright © 2015 Pepwave
7.1.5 SNMP
SNMP, or simple network management protocol, is an open standard that can be used
to collect information about your access point. The SNMP section offers a range of
settings to control simple network management protocol access.
SNMP Settings
Server Name
This field shows the AP name defined at System>Admin Security.
SNMP Port
This option specifies the port which SNMP will use. The default port is 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2c
This option allows you to enable SNMP version 2c.
SNMPv3
This option allows you to enable SNMP version 3.