7.1.8 Reboot
This section provides a reboot button for restarting the system. For maximum reliability,
your access point can equip with two copies of firmware, and each copy can be a
different version. You can select the firmware version you would like to reboot the
device with. The firmware marked with (Running) is the current system boot up
firmware.
Please note that a firmware upgrade will always replace the inactive firmware
partition.
7.2 AP
Use the controls on the AP tab to set the wireless SSID and AP settings, as well as
wireless distribution system (WDS) settings.
7.2.1 Wireless SSID
Wireless network settings, including the name of the network (SSID) and security policy,
can be defined and managed in this section.
To Next Page
Loading...
Need help?
General
