connecting to hosts on the WAN (e.g., email notification, remote syslog, etc.) The
device will also listen on the IP address wh
en hosts on the WAN access services
served on this device (e.g., web admin accesses from WAN, DNS server, etc.)
WAN Default
Gateway
WAN DNS
Servers
Enter the selected WAN's corresponding DNS server IP addresses.
To add a new LAN, click the New LAN button. To change LAN settings, click the name of the
LAN to change under the LAN heading.
The following settings are displayed when creating a new LAN or editing an existing LAN.
IP Settings
IP Address &
Subnet Mask
Enter the Pepwave router’s IP address and subnet mask values to be used on the
LAN.
Network Settings
To Next Page
Loading...
