Enable
Check the box to allow the Pepwave router to manage the web admin access
information of the AP.
Web Access
Protocol
These buttons specify the web access protocol used for accessing the web admin
of the AP. The two available options are HTTP and HTTPS.
Management Port
This field specifies the management port used for accessing the device.
HTTP to HTTPS
Redirection
This option will be available if you have chosen HTTPS as the
Protocol. With this enabled, any HTTP access to the web admin will red
HTTPS automatically.
Admin User Name
This field specifies the administrator username of the web admin. It is set as
admin by default.
Admin Password
This field allows you to specify a new administrator password. You may also click
the Generate b
utton and let the system generate a random password
automatically.
Navigating to AP>Settings on some Pepwave models displays a screen similar to the one
shown below:
To Next Page
Loading...
