18
Main Burner
1. If you have already attempted to light the main burner with the
igniter, allow 5 minutes for any accumulated gas to dissipate.
2. Insert a match into the lighting rod (A) as shown in fig. 20.
Ignite the match and insert through the cooking grids (B) to
the burner.
3. Press the control knob and rotate to the “IGNITE/HI” setting,
continue to press the knob until the burner ignites. The burner
should light immediately.
4. If the burner does not light within seconds turn the knob to the
“OFF” position, wait 5 minutes and try again.
Searing Side Burner
1. If you have already attempted to light the searing side burner
with the igniter, allow 5 minutes for any accumulated gas to
dissipate.
2. Insert a match into the lighting rod (A) as shown in fig. 21.
Ignite the match and insert through the cooking grids (B) to
the burner.
3. Press the control knob and rotate to the “HI” setting, continue
to press the knob until the burner ignites. The burner should
light immediately.
4. If the burner does not light within seconds turn the knob to the
“OFF” position, wait 5 minutes and try again.
Rotisserie Burner
Note: Remove the warming rack when using a match to light the
rotisserie burner.
1. If you have already attempted to light the rear rotisserie
burner with the igniter, allow 5 minutes for any accumulated
gas to dissipate.
2. Insert a match into the lighting rod (A) as shown in fig. 22.
Ignite the match and hold next to the burner (B).
3. Press the control knob and rotate to the “HI” setting. Once
the burner ignites, continue to press the knob for 15 seconds.
4. If the burner does not light within seconds turn the knob to the
“OFF” position, wait 5 minutes and try again.
Fig. 20
Fig. 21
Fig. 22
B
A
A
B
B
A
To Next Page
Loading...
