8
Pack Description Quantity
A 5/32-in. x 10-mm Truss Head Screw 26 pcs.
B 5/32-in. Locking Washer 26 pcs.
C 1/4-in. x 15-mm Truss Head Screw 47 pcs.
D 1/4-in. Locking Washer 47 pcs.
E 5/32-in. x 15-mm Ladder Bolt 1 pc.
F Lighting Rod 1 pc.
G Battery / AAA 1 pc.
H Door Hinge Bracket, Left 1 pc.
I Door Hinge Bracket, Right 1 pc.
J 1/4-in. Washer 3 pcs.
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare
parts with package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
• Estimated Assembly Time: 50 minutes
• Tools Required for Assembly: Phillips Screwdriver (not included) and Wrench (not included)
• Note: The right and left sides of the grill are designated as if you are standing and facing the grill.
1. Caster Assembly
Mount the casters onto the bottom panel (A) using sixteen
1/4-in. x 15-mm truss head screws from pack C and sixteen
1/4-in. locking washers from pack D.
The swivel caster with brake should be positioned under
the left rear of the cart bottom (C) and the swivel caster
should be positioned under left front as shown in fig. 1. The
two stationary casters (B) should be positioned under the
right side.
HARDWARE CONTENTS
PREPARATION
ASSEMBLY INSTRUCTIONS
Fig. 1
B
C
A
A B C
D E F
G
H I
J
To Next Page
Loading...
