If the skier falls, pull back on the throttle to disengage system. Slowly return to skier and pull them
back up again. System will take over automatically once SETPOINT is reached. Speed changes can be
made “on the fly”.
When you are finished with the speed control, go to neutral and press the ON/OFF key.
TRICK SETTINGS
Trick Setting (KD) is accessed by pressing the Down Key when the word “TRICK” is highlighted. See
above illustration.
Kd – This adjustable parameter controls the “firmness of the Pull”. The higher the number, = more
aggressive pull. Normal range 14 – 28.
To Next Page
Loading...
