Section 5. RPM MODE
USING RPM MODE
In this mode, the screen will appear as follows:
Operating in this mode is very similar to using the Wakeboard or Trick modes, except the system is
now controlling to an RPM SETPOINT.
RPM DRIVING
Prior to towing the rider / skier, select the RPM SETPOINT by using the UP or DOWN keys with the
SETPOINT highlighted on the screen. Pull the rider up smoothly and continue to accelerate up to or
beyond the RPM SETPOINT so the system can engage and take control.
Changes can be made to the RPM SETPOINT while the system in engaged (“on the fly”) to fine-tune
the RPM you desire.
To Next Page
Loading...