MAN-0012 Rev. I Page | 40
4. The material between the A
and B should now be folded to
your right of the A and B line
paths.
5. Hold down the canopy at the
B line path and grab the seven
T seams directly on top of the
C-line path. Fold the C lines to
the left, past the B-line path as
far as possible, then bring
them back and lay the C lines on
top of the B lines. This results
in the canopy fabric between
the B and C lines being folded
on the left side of the canopy
and the C lines are directly on
top of the B lines.
Straighten
this fold as necessary
6. Clear the stabilizers while
ensuring tension on the line
groups.
To Next Page
Loading...