Performance Designs PD Series

To Next Page

To Previous Page

MAN-0012 Rev. I Page | 41

7. Grab the seven T seams

directly above the D-line path

and fold to the left placing the

D lines on top of the C-line

path. The material between

the C and D lines should be

folded to the right of the lines.

8. Hold down the canopy at the

D- line path and grasp the tail

with your right hand. Hold the

steering lines to the left past

the D-line path and then back

so that the canopy fabric

between the D and steering

lines is folded on the left side

of the canopy and the steering

lines are directly on top of the

D lines. Make the second half

of this fold on an angle so that

there is enough slack in the

steering lines to set the brakes.

The D lines should stay taut.

9. Straighten this fold as

necessary after setting the

brakes. Be sure none of the

lines are wrapped around a

slider stop.

Performance Designs PD Series - Page 44