EasyManua.ls Logo

Performance Tool W1640 User Manual

Performance Tool W1640
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2.5 Ton Garage Jack
OWNER'S MANUAL
Stock Number W1640
FOR YOUR SAFETY,
please read these instructions carefully and retain them for future use.
LIMITED WARRANTY
PERFORMANCE TOOL extends only the following warranties, and only to original retail purchasers. These warranties give
specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all
exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL warrants the product to be free from defects in materials and workmanship under normal use and service.
A defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is
returned to place of purchase immediately after discovery of defect. After 90 days and up to 1 year from date of purchase,
PERFORMANCE TOOL will replace at no charge any parts which our examination shall disclose to be defective and under
warranty. These warranties shall be valid only when a sales receipt showing the date of purchase accompanies the defective
product or defective part(s) being returned. For part(s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 24086 Seattle, WA 98124
These warranties exclude blades, bits, punches, dies, bulbs, fuses, and other consumables which must be replaced under normal
use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed,
or which has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties
apply to any product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and
service.
PERFORMANCE TOOL does not authorize any other person to make any warranty or to assume any liability in connection with its
products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL makes no express or
implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL makes no implied warranty of
merchantability and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for
personal, family or household use and not for commercial or business use, PERFORMANCE TOOL makes an implied warranty of
merchantability (and, if otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the particular
qualities or characteristics, and for the duration, expressly warranted above. The laws on limitation of implied warranties may differ
from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL shall not be liable for consequential, incidental or special damages resulting from or in any manner
related to any product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective
product or part shall be the repair, or replacement thereof as provided above. The laws on limitation of remedies or on
consequential, incidental or special damages may vary from state to state, so the above limitations may not apply in all cases.
Copyright © 1999 PERFORMANCE TOOL – All rights reserved
Question and Answer IconNeed help?

Do you have a question about the Performance Tool W1640 and is the answer not in the manual?

Performance Tool W1640 Specifications

General IconGeneral
BrandPerformance Tool
ModelW1640
CategoryJacks
LanguageEnglish

Summary

Limited Warranty

Operation

Before Using Your Jack

Prepare the jack by opening the release valve and pumping the handle to distribute hydraulic fluid.

To Raise

Close the release valve, place the handle, and pump to lift the load. Use jack stands for support.

To Lower

Turn the release valve counter-clockwise to slowly lower the load, ensuring controlled descent.

Care and Maintenance

Storage and Lubrication

Store jack with lifting arm and handle sleeve down to prevent corrosion; keep jack clean and lubricated.

Fluid and Inspection

Use SAE 10 fluid, check level to bottom of oil fill plug; inspect for worn or damaged parts regularly.

Part Replacement

Replace worn or damaged parts with Performance Tool replacements; ensure qualified personnel perform repairs.

Specifications

Capacity and Dimensions

Details jack capacity, low height, maximum height, and lift range.

Important Safety Information

Critical warnings regarding load loss, damage, personal injury, and proper usage.

Troubleshooting

Common Jack Issues

Addresses problems like not lifting, not holding load, or feeling spongy, with potential causes.

Troubleshooting Steps

Provides specific procedures for airbound units, valve seating, and fluid level checks.

Related product manuals