EasyManuals Logo

Performance Tool W1651 User Manual

Performance Tool W1651
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
Capacity: ............................... 10 Ton (20,000 lbs.), 5 Ton (10,000 lbs.) with extensions
Ram Travel: .................................................................................................................. 6 in.
Extension Pole Length: ............................................................................... 5 ft. Maximum
Spreader Wedge Capacity: .................................... 1/2 Ton, 3 3/4 in. Maximum Opening
Hose Length: ................................................................................................................. 6 ft.
SAFETY GUIDELINES / DEFINITIONS
UNPACKING AND INSPECTION
SPECIFICATIONS
IMPORTANT SAFETY INFORMATION
Specifications are subject to change without notice
WARNING
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE AND WILL VOID WARRANTY.
This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and
troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are
based upon the latest product information available at the time of publication. The manufacturer reserves the right to make
product changes at any time without notice.
After opening the carton, unpack your new product and related parts & accessories. Please inspect it
carefully for any damage that may have occurred during transit. Please check it against the
photograph on carton. If any parts are missing, please call customer service at 1-800-426-1262
between 6:30 a.m. and 4:30 p.m. Pacific time.
WARNING DO NOT operate this product if damaged during shipment, handling or misuse. Do not operate the
product until the parts have been replaced or the fault rectified. Failure to do so may result in serious personal injury
or property damage. All damaged parts must be repaired or replaced as needed prior to operating this product.
Check to see that all nuts, bolts and fittings are secure before putting this product into service. If you have any
questions, or require assistance with damaged or missing parts, please contact our factory customer service
department at: 1-800-426-1262.
Please have the serial number, model number, and date of purchase available for reference when calling.
WARNING: Read and understand this entire instruction manual before attempting to assemble,
install, operate or maintain this product. Failure to comply with the instructions may result in serious
personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using
this product:
DANGER Indicates an imminently hazardous
situation that, if not avoided,
WILL result in death or serious
injury.
WARNING Indicates a potentially hazardous
situation that, if not avoided,
COULD result in death or serious
injury.
CAUTION Indicates a potentially hazardous
situation that, if not avoided,
MAY result in minor or moderate
injury.
NOTICE Indicates important information,
which if not followed,
MAY cause damage to equipment.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Performance Tool W1651 and is the answer not in the manual?

Performance Tool W1651 Specifications

General IconGeneral
BrandPerformance Tool
ModelW1651
CategoryJacks
LanguageEnglish

Related product manuals