Performance Tool W1651 User Manual

10 TON HYDRAULIC RAM SYSTEM
OWNER’S MANUAL
Item Number W1651
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product.
The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels
and while in use, maintaining the unit in good working order. If the owner and/or operator are not
fluent in English, the product warnings and instructions shall be read and discussed with the
operators’ native language by the purchaser/owner or his designee. Make sure that the operator
comprehends its contents. Safety information shall be emphasized and understood prior to usage.
The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product
must also be of sound mind and body and must not be under the influence of any substance that
might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.

Performance Tool W1651 Specifications

General

Type	Hydraulic Bottle Jack
Material	Steel
Pump Type	Single piston
Color	Red
Maximum Height	19.25 inches

Summary

Safety Guidelines and Definitions

Signal Word Definitions

Defines signal words (DANGER, WARNING, CAUTION, NOTICE) used in the manual.

Inspection and Handling Warnings

Covers product inspection post-unpacking and warnings about operating damaged equipment.

Important Safety Information

General Safety Precautions and Best Practices

Details 16 safety points for operation, maintenance, and workplace safety.

California Proposition 65 Warning

Addresses the chemical warning regarding cancer, birth defects, or reproductive harm.

Setup Instructions

Ram Attachments

Details connecting extensions, bases, and heads for ram setup.

Spreader Wedge Setup

Provides instructions for setting up the spreader wedge for use.

Before Use

Bleeding the Pump

Essential procedure to remove air from the hydraulic system before operation.

General Operation

Using the Ram

Instructions on positioning and applying pressure with the hydraulic ram.

Using the Spreader Wedge

Guidance on positioning and applying pressure with the spreader wedge.

Care & Maintenance

Pre-Use Inspection and Maintenance

Covers pre-use checks, part replacement, and operational testing.

Cleaning and Storage

Guidelines for cleaning and storing the equipment to prevent damage.

Fluid Recommendations and Oil Change

Details on recommended hydraulic fluid and the procedure for changing oil.

Troubleshooting

Common Issues and Solutions

Identifies common operational problems and provides step-by-step solutions.