Please have the serial number, model number, and date of purchase available for reference when calling.
MODEL NUMBER: ______________________________________
SERIAL NUMBER: _______________________________________
DATE of PURCHASE: ____________________________________
READ ALL SAFETY WARNINGS BEFORE USING POLISHER/BUFFER
WARNING
Some dust created by spraying, blowing, power sanding, sawing, grinding, drilling and other construction activities contains
chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Reduce your exposure to these chemicals by wearing approved safety equipment such as dust masks that are designed to
filter out microscopic particles.
WARNING
Use of this product will expose you to chemicals known to the State of California to cause cancer, birth defects, and
reproductive harm. Avoid inhaling vapors and dust. Wash hands after using.
WARNING
This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects, and
reproductive harm. Wash hands after handling.
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
1. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polar
ized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and
grounded power supply system.
2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is grounded.
3. Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord to carry the tool or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
5. When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and
reduce the risk of electric shock.
PERSONAL SAFETY
1. Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your finger on the switch or plugging in tools that
have the switch ON invites accidents.
4. Remove adjusting keys or wrenches before turning the tool ON. A wrench or a key that is left attached to a rotating part of the tool may
result in personal injury.
SAFETY WARNINGS
UNPACKING & INSPECTION CONTINUED
3.
To Next Page
Loading...
Need help?
General
