General maintenance
Before each use, inspect the guards, switches, power cord, and extension cord. Check for loose
screws, jamming, improper mounting, broken parts, and any other condition that may affect the
safe operation of the cut-off saw. If an unusual operating noise or vibration occurs, turn the cut-off
saw OFF and immediately correct the problem before using the cut-off saw again.
Cleaning
Clean dust and debris from vents, tabletop, and vise screw. Use a dry, clean rag to clean all areas of
the cut-off saw. Never use solvents or other harsh chemicals for cleaning as they are harmful to
plastic and other insulated parts. Petroleum-based products, brake fluid, thinners and ammonia
detergents will also permanently damage the cut-off saw.
14
To Next Page
Loading...
Need help?
General