Peri CB 160 - Finishing Tasks

19
Translation of the Original Instructions for Use
Head of Product Development
Dipl.-Ing.Rainer Bolz
PERI GmbH
Weissenhorn, 11.02.2014
Manufacturer
PERI GmbH
Postfach 1264
89259 Weissenhorn
Person residing within the Community authorised to compile the
relevant technical documentation:
Dipl.-Ing. Rainer Bolz
PERI GmbH
Rudolf-Diesel-Strasse 19
89259 Weissenhorn
Description and identification of the machinery:
Product Group:
Typ:
Article-No.:
Commercial Designation:
Climbing Systems
Lifting Accesories
051120
Platform Connection CB 160
It is expressly declared that the machinery fulfils all relevant provisions of the
following EU Directives:
European Directive On Machinery 2006/42/EC
EN 13155 : 2009-08
EN 12100 : 2011-03
EN 1677-1 : 2009-03
Reference to the harmonised standards used, as referred to in Article 7 Annex 2:
EC-declaration of conformity
Platform Connection CB 160
This document is a translation into
English from the German original.
EC - declarartion of conformity
according to the EU Machinery Directive 2006/42/EG
Annex II, 1.A