4
Translation of the Original Instructions for Use
Platform Connection CB 160
Introduction
The Platform Connection CB 160 serves
as a load-bearing point for accomodating
tensile forces. It may only be transported
by crane. It is used as a connection
between the working platform and lifting
gear.
The Platform Connection CB 160 is not
used in continuous operations and, after
being mounted on the Climbing Bracket
CB 160, is an integral part of the load.
The Platform Connection CB 160 may
be permanently fixed to the Climbing
Bracket CB 160 only at the designated
points.
Furthermore, timber can also be attached
to the Platform Connection CB 160.
Girders can be fixed on the timber to
form a working platform.
These Instructions for Use contain infor-
mation for ensuring proper handling and
correct application, inspection and main-
tenance.
The product described here corresponds
to the relevant provisions and regulations
of EU Machinery Directive 2006/42/EC.
These Instructions for Use serve as the
basis for the project-related risk assess-
Intended Use
ment as well as instructions for the
provision and use of the system by the
contractor (user). However, they do not
replace them.
The Platform Connection CB 160 may
only be used:
1. Within the permissible load-bearing ca-
pacity.
2. Within the permissible temperature
limits of -20 °C to +60 °C.
3. When in faultless condition.
4. If correctly mounted.
To Next Page
Loading...
