PerkinElmer aanalyst 200 User Manual

Maintenance
9-56
AS-90plus and AS-93plus Autosampler Maintenance
Routine Maintenance
Minimal routine maintenance is required. Keep the carousel clean and try to avoid spills. Do not
use abrasives to clean the clear plastic carousel cover. Do not use organic solvents to clean the
carousel cover.
For more information, refer to the manuals received with the Autosamplers. For the AS-90plus
Autosampler, see manual B314-0291 and for the AS-93plus Autosampler, see manual B314-
0330.
Spare Parts
If corrosive solutions are being routinely analyzed, a corrosion-resistant, platinum-rhodium probe
is available to replace the standard stainless-steel version on the AS-90plus and AS-93plus
Autosamplers. You may find it convenient to purchase additional sample trays, so that samples
may be loaded into a second carousel while the first is still in use. For spare parts, refer to the
AS90 or AS93 manuals provided with the Autosamplers or the e-ssentials catalog.
Servicing
Servicing of the Autosamplers may only be performed by a trained PerkinElmer Service
Representative. Contact your local PerkinElmer representative to schedule a service call.

PerkinElmer aanalyst 200 Specifications

General

Type	Atomic Absorption Spectrometer
Category	Laboratory Equipment
Wavelength Range	190 - 900 nm
Flame Type	Air-Acetylene, Nitrous Oxide-Acetylene
Detector Type	Photomultiplier Tube
Detection Limit	Varies depending on element
Light Source	Hollow Cathode Lamp
Spectral Bandwidth	0.2, 0.7 nm
Optical System	Double-beam
Display	LCD
Connectivity	RS-232