PerkinElmer Lambda 465 Assembly/Installation Instructions

09931295C
13
Lambda 465 Installation
CAUTION
ATTENTION
Make sure the instrument is turned off while installing this accessory.
Assurez-vous que l’instrument est éteint lors de l’installation de cet
accessoire.
Connect to the Single/ Water Jacketed Single Cell Holder
1. Connect the plug of the power cable to the power input socket of the control unit.
Figure 25 Connecting the plug of the power cable
2. Connect the stirrer control cable to the 4-pin socket of the control unit.
Figure 26 Connecting the stirrer control cable

PerkinElmer Lambda 465 Specifications

General

Brand	PerkinElmer
Model	Lambda 465
Category	Measuring Instruments
Language	English