PerkinElmer Lambda 465 Assembly/Installation Instructions

09931295C
7
Lambda 365 Installation
CAUTION
ATTENTION
Make sure the instrument is turned off while installing this accessory.
Assurez-vous que l’instrument est éteint lors de l’installation de cet
accessoire.
Connect to Single Cell Holder
1. Connect the plug of the power cable to the power input socket of the control unit.
Figure 8 Connecting the plug
2. Connect the stirrer control cable to the 4-pin socket of the control unit.
Figure 9 Connecting the stirrer control cable

PerkinElmer Lambda 465 Specifications

General

Brand	PerkinElmer
Model	Lambda 465
Category	Measuring Instruments
Language	English