Need help?Do you have a question about the PerkinElmer Lambda 850 and is the answer not in the manual?
General| Wavelength Reproducibility | ±0.1 nm |
|---|---|
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Wavelength Accuracy | ±0.3 nm |
| Photometric Accuracy | ±0.003 A (0 - 0.5 A) |
| Photometric Reproducibility | ±0.001 Abs |
| Light Source | Deuterium and Tungsten Halogen lamps |
| Detector Type | Photomultiplier Tube (PMT) |
| Stray Light | <0.005 %T at 220 nm (NaI), <0.005 %T at 340 nm (NaNO2) |
| Data Interval | 0.1 nm |
| Baseline Flatness | ±0.0005 A (UV/Vis), ±0.0005 A (NIR) |
Lists essential safety precautions to be observed when operating the Lambda spectrometer.
Covers electrical hazards, protective conductors, and safe wiring practices.
Provides instructions on safely connecting the spectrometer to the electrical power supply.
Outlines the procedures for calibrating the spectrometer for accurate measurements.
Step-by-step guide for powering on and initializing the spectrometer.
Details the procedure for replacing the deuterium or halogen lamp.
To Next Page
