Need help?Do you have a question about the PerkinElmer Lambda 950 and is the answer not in the manual?
General| Wavelength Range | 175 - 3300 nm |
|---|---|
| Scan Speed | up to 4000 nm/min |
| Wavelength Accuracy | ±0.08 nm (UV/Vis), ±0.3 nm (NIR) |
| Photometric Accuracy | ± 0.3 %T (0 - 100 %T) |
| Photometric Range | 0 to 4.0 A |
| Light Source | Tungsten-Halogen and Deuterium lamps |
| Detector | Photomultiplier tube (UV/Vis); PbS (NIR) |
| Stray Light | <0.00007% T at 220 nm (NaI), <0.0005% T at 340 nm (NaNO2), <0.05% T at 1420 nm (H2O) |
| Sample Compartment Size | Standard 10 mm cuvette holder |
Describes general safety practices and precautions for operating the spectrometer.
Details essential precautions and electrical safety measures for instrument use.
Addresses environmental considerations, hazardous chemicals, and warnings.
Elaborates on electrical hazards, including lethal voltages and grounding requirements.
Provides step-by-step instructions for replacing fuses in the instrument.
Details how to connect the instrument to power and its system components.
Explains how to set up the instrument in the software and perform calibration.
Outlines the procedure for starting up the instrument and basic operation.
To Next Page
