To Next PageTo Next Page
Need help?Do you have a question about the PerkinElmer Lambda 35 and is the answer not in the manual?
General| Detector Type | Photomultiplier Tube |
|---|---|
| Scan Speed | Up to 2400 nm/min |
| Wavelength Reproducibility | ±0.1 nm |
| Display | LCD |
| Wavelength Range | 190 to 1100 nm |
| Wavelength Accuracy | ±0.3 nm |
| Photometric Accuracy | ±0.3% T |
| Light Source | Tungsten-Halogen and Deuterium |
| Stray Light | <0.05% at 220 nm |
| Data Output | USB |
| Photometric Reproducibility | ±0.001 Abs |
| Baseline Stability | ±0.001 Abs/hour |
| Response Time | 1 second |
| Baseline Flatness | ±0.001 Abs (190 to 1100 nm) |
Details compliance with safety standards like IEC and CSA, and electrical protection measures.
Covers correct power cord connections, pollution degree, and electrical safety.
Warns about electrical hazards, live voltages, and capacitor charge.
Provides comprehensive technical specifications for the Lambda 25 spectrometer.
Details the technical specifications for the Lambda 35 spectrometer, covering various parameters.
Lists the technical specifications for the Lambda 45 spectrometer, including performance details.
Provides instructions for safely connecting the spectrometer to the electrical power supply.
Details how to set up the PC and install the necessary UV WinLab software.
Instructions for installing and aligning the single cell holder for optimal performance.
Procedures for cleaning the sample compartment to maintain its finish and prevent contamination.
Step-by-step instructions for replacing the halogen lamp, including safety precautions.
Detailed procedure for replacing the deuterium lamp, including safety warnings.
