Need help?Do you have a question about the PerkinElmer Lambda 1050 and is the answer not in the manual?
General| Type | UV/Vis/NIR Spectrophotometer |
|---|---|
| Wavelength Range | 175 - 3300 nm |
| Software | UV WinLab |
| Wavelength Accuracy | ±0.08 nm UV/Vis, ±0.3 nm NIR |
| Photometric Accuracy | ±0.002 Abs |
| Light Source | Deuterium and Tungsten-Halogen lamps |
| Detector | Photomultiplier Tube (PMT) |
| Baseline Flatness | ±0.0005 Abs |
| Sample Compartment | Large sample compartment |
| Data Acquisition | Yes |
Lists essential precautions for instrument operators, including electrical safety.
Covers electrical hazards, grounding, and lethal voltages present within the instrument.
Details the all-reflecting, double-monochromator optical system of the spectrometers.
Details how to safely connect the instrument to the electrical power supply.
Explains how to connect the spectrometer to a computer for operation.
Guides the user through configuring the instrument within the UV WinLab software.
Describes the calibration routines to ensure accurate measurements.
Provides guidance on installing various accessories for the spectrometer.
Outlines the steps for safely starting up the spectrometer and software.
Details the procedure for performing coarse and fine alignment of the cell holder.
Explains when and how to replace the instrument's source lamps.
To Next Page
