What to do if PerkinElmer Measuring Instruments parent instrument has entered fatal error?
If the parent instrument has entered a fatal error state, resulting in the AS 6000 also entering an error state, it indicates an error occurred in the parent instrument. Check the parent instrument.
What to do if PerkinElmer Measuring Instruments timeout on command?
If there is a timeout on a command sent to the AS 6000, the I2C connection cable might be defective. Replace the I2C cable.
General| Brand | PerkinElmer |
|---|---|
| Model | TGA 4000 |
| Category | Measuring Instruments |
| Language | English |
Explains symbols in Pyris help for safe operation.
Defines standard formats for notes, cautions, and warnings.
Illustrates graphic symbols on instruments for safety.
Details electrical connection and safety warnings for the instrument.
Outlines EMC standards and compliance for different regions.
Conforms to safety requirements for electrical equipment and directives.
Specifies safe operation in environments with nonconductive foreign matter.
Provides guidance on disposal of electrical and electronic equipment.
Details power source, line voltage, and instrument power needs for setup.
Lists necessary laboratory conditions: clean area, stable power, humidity, temperature.
Specifies requirements for purge gas purity and connection.
Details physical space, altitude, and installation overvoltage category.
Explains using USB multiport (EdgePort) for connecting multiple instruments.
Lists essential safety guidelines for operating the TGA 4000.
Provides key technical details like power, voltage, fuses, and dimensions.
Covers procedures for decontaminating and cleaning the instrument.
Details warning labels on the upper ring around the furnace.
Illustrates and explains warning labels on the rear panel.
Step-by-step instructions for safely removing the TGA 4000 from packaging.
Lists components found in the Spares and Accessories Kit.
Guides on selecting voltage, installing gases, cooling, and leveling.
Details connecting purge gas inlets for system and sample.
Connects sample and system purge gas lines.
Instructions for connecting the integrated cooling system or external chiller.
Procedure for connecting the instrument to a tap water cooling supply.
Steps to ensure the analyzer is properly leveled on the bench.
Guide for connecting the TGA 4000 to the computer and printer.
Steps to configure the TGA 4000 within the Pyris software.
Instructions on how to start Pyris Manager and the control panel.
Details procedures for furnace, temperature, and weight calibration.
Specific steps for performing the weight calibration of the TGA 4000.
Overview of the TGA 4000's features, applications, and benefits.
Describes the balance, furnace, cooling system, and autosampler compatibility.
Explains temperature range and maximum heating rates based on supply voltage.
Discusses sample preparation, pans, and atmosphere control for TGA analysis.
Step-by-step guide for loading samples into the furnace.
Explains when recalibration of furnace, temperature, or weight is necessary.
Outlines routine maintenance tasks, including cleaning procedures.
Procedure for replacing the sample thermocouple.
Lists part numbers for supplies, accessories, and replacement parts.
Lists miscellaneous part numbers for tubing, cables, and fuses.
Introduces the AS 6000 autosampler accessory for automation.
Lists safety precautions specific to the AS 6000 autosampler.
Explains operation and automation of the AS 6000 with Pyris software.
Describes the typical sequence of operations performed by the autosampler.
Details a faster cycle option by eliminating lid replacement steps.
Procedure for aligning the autosampler's gripper if sample handling is incorrect.
Covers sample preparation, loading, and taring crucibles for the autosampler.
Guide on creating and running sample analysis sequences using Pyris Player.
Lists common AS 6000 error messages, causes, and corrective actions.
Specific error messages related to AS 6000 interaction with TGA 4000.
Covers cleaning and decontamination procedures for the autosampler.
Detailed steps for replacing the sample thermocouple with autosampler attached.
To Next Page