Engine and Factory Mounted CEM
Illustration 41 g06263203
Typical example
(1) Rear lifting eye (2) Front lifting eye
Engines with a factory-mounted CEM with or without
a factory-mounted radiator, can be lifted by the CEM
front and rear brackets load ring (provided) and using
a certified spreader bar.
Follow the safety instructions for the selected tool to
ensure a safe lift.
Remove any ATAAC lines, air cleaners, or other
attachments that would otherwise interfere with the
lift chains or other lifting devises.
The engine package center of gravity will change
depending on the engine attachments. Adjust the
spreader bar and chains as necessary to maintain a
lift within 5 degrees of horizontal in all directions.
36 M0087475-06
Operation Section
Product Lifting
To Next Page
Loading...
