Illustration 21 g06040627
(3) CEM Identification plate
Illustration 22 g02236574
CEM identification plate
The CEM identification plate contains the following
information: part number, serial number, change
level, and configuration ID code. This information
may be needed by the Perkins distributor when
inquiries are being made on the CEM.
Pump Electronic Tank Unit (PETU)
and Pump Electronic Unit (PEU)
Note: Some applications may not have a diesel
exhaust fluid tank installed into to the electronic unit.
Illustration 23 g06040642
Typical example
(4) PETU Plate location
Illustration 24 g03049116
Typical example PETU serial plate
Record the information on the CEM and PETU serial
plates. The information will be required by your
Perkins distributor to identify replacement part
numbers.
i05951816
Emissions Certification Film
Note: This information is pertinent in the United
States, in Canada and in Europe.
The emissions label is located on the top of the valve
mechanism cover.
M0076814-03 25
Product Information Section
Emissions Certification Film
To Next Page
Loading...
