Perkins 854F-E34T - Operation Section; Lifting and Storage; Product Lifting

This document is printed from SPI². Not for RESALE
• ECM
• Pressure sensor
• Temperature sensors
• Crankshaft speed/timing sensor
• Camshaft speed/timing sensor
• The suction control valve for the fuel injection
pump
• Wastegate solenoid
• Electronic unit injectors
Sensor Locations for the Engine
The illustrations in this section show the typical
locations of the sensors for the industrial engine.
Specific engines may appear different from the
illustration due to differences in applications.
Illustration 26 g03343020
Sensors and electrical connector locations on the left side of the 854 engine
(1) 10-pin engine interface connector
(2) 62-pin engine interface connector
(3) Fuel pressure sensor
(4) Fuel temperature sensor
(5) Inlet metering valve for the fuel injection
pump
(6) Oil pressure switch
(7) Crankshaft speed/timing sensor
(8) Water In Fuel (WIF) sensor
30 UENR0623
Engine Operation