This document is printed from SPI². Not for RESALE
Systems Operation Section
General Information
i05241818
Introduction
The following model views show a typical industrial
engine. Due to individual applications, your engine
may appear different from the illustrations.
Illustration 1 g02317613
Typical example
(1) Clean Emissions Module (CEM)
(2) Oil gauge (Dipstick)
(3) Electronic Control Module (ECM)
(4) Air inlet connection from charge cooler
(5) Coolant outlet connection
(6) Air intake from air filter
4
UENR0623
General Information
To Next Page
Loading...
