Design and Function
21
Owner’s Manual Corpus
Design and function
The control panel provides feedback related to the available Seat Functions,
active Seat Functions Inhibits, active Drive Speed Limits and active Drive
Inhibits through its LEDs.
Thera are three states that the LED above the switch can have:
Off
The function icon is “extinguished” or “OFF”.This signifies that the function is not
currently active. The selection of the Left/Right seat functions is toggled with the
“Shift Switch”
Solid
A SOLID LED communicates “Drive Speed” related information to the user
Solid
green
LED signifies that the chair can drive at full speed.
Solid
yellow
LED signifies that the drive speed is limited due to the position of
this actuator.
Solid
red
LED signifies that the drive is inhibited due to the position of this actuator.
Flashing
A FLASHING LED communicates “Actuator” related information to the user.
Flashing
green
LED signifies a special or extended feature.
Flashing
yellow
LED signifies that the Seat Function is inhibited in one direction,
due to a safety limit. The switches below the icon will only move the seat
function in the “safe” direction.
Flashing
red
LED signifies that there has been an error detected with the
actuator. Depending on the error, the switches below may not operate the seat
function.
Note the circumstances when this indication occurs as this information
may help your service provider. Contact your service provider for additional
assistance, as service may be needed.
To Next Page
Loading...
