Permobil Corpus - Design and Function - Manual Legrest Angle

Design and Function
24
Owner’s Manual Corpus
Design and function
Manual Seat Functions - Legrest Angle
The angle of the legrests can be regulated by means of an adjustable clamp
tube with instant locks in a number of fixed positions.
1. Pull out the spring-loaded handle of the instant lock so that the clamp tube runs
freely and it is possible to adjust the angle of the legrest.
2. Set the legrest at the desired angle and then lock it in position by releasing
the handle and allowing it to engage in the selected hole in the clamp tube.
3. Check after adjusting the legrest that it is locked in position.

WARNING
Do not put weight on the legrest while adjusting the angle. There is a risk of pinching accidents.