Positioning Belt
33
Owner’s Manual Corpus
Positioning Belt (Option)
Fitting the Positioning Belt
There is an accessory rail on both sides of the seat frame for mounting such
items as the positioning belt. Mount the positioning belt in the upper track of the
rail.
1. Screw the belt in place, with the snap lock on the side which best suits the
user and the other part with the buckle on the opposite side.
2. After mounting, check that the belt buckle locks properly in the snap lock.
Fitted Belt.Fitted Belt.
Snap Lock for the Belt.
WARNING
Permobil positioning belts are designed to position the user only and will not protect you in an
accident. You may even receive further injury from the belts. Also check regularly that the belt is
in good condition, and that it is not worn or damaged.
To Next Page
Loading...
