Permobil Corpus - Transport - Sliding Backrest Removal

Transport
35
Owner’s Manual Corpus
Lower Locking Pegs and Backrest Plate.
Transport
Corpus Seat with Sliding Back
1. Remove the back cushion.
2. Loosen the upper locking peg and the locking knob on the back of the
backrest.
3. Push the top of the backrest slightly forward to release it from the upper
locking peg.
4. Release the backrest from both lower locking pegs.
5. Push the backrest plate straight up and then lift the backrest off.
If necessary, the headrest can also be detached, see page 30-31.
Backrest
Plate
Locking
peg
Locking
peg