Permobil Halsa - Default Chapter; Table of Contents

Hälsa Bed Owner’s Manual
Table of Contents
Introduction 1
Design and Functions ...............................................................................................................................1
Specifications ...............................................................................................................................................2
Safety Precautions .....................................................................................................................................2
Assembly 3
Overview........................................................................................................................................................3
Inspection before unpacking .................................................................................................................3
Damage during transport ...................................................................................................................4
Incorrect shipment ................................................................................................................................4
1 – Unpack the bed ...................................................................................................................................5
2 – Assemble the frame ...........................................................................................................................8
Remove the platform ........................................................................................................................ 12
3 – Connect the electrical systems ................................................................................................... 13
3.1 - Access the central motor ....................................................................................................... 14
3.2 - Temporarily remove the cable separator ......................................................................... 15
3.3 - Connect the foot hi-low motor ........................................................................................... 16
3.4 - Connect the head hi-low motor .......................................................................................... 17
3.5 - Connect the power cord and hand pendant .................................................................. 17
3.6 - Connect the battery backup ................................................................................................. 18
3.7 - Connect the leg/knee motor ................................................................................................ 19
3.8 - Cut remaining cable ties on bed frame ............................................................................ 20
3.9 - Test the connections ............................................................................................................... 21
3.10 - Replace the cable separator ............................................................................................... 22
4 – Install optional side rails................................................................................................................ 23
Install full side rails ............................................................................................................................. 23